Smittybilt 53036 Bull Bar Manuel d'utilisateur télécharger pdf

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220

Installation Instructions

Bull Bar (#53035&53036)

06 Dodge Ram 1500

PARTS LIST:

1 – BULL BAR

2 – BRACKETS DRIVER/PASSENGER SIDE

6 – 7/16 X 1 1/4 HEX HEAD BOLTS

6 – 7/16 HEX HEAD NUTS

12 – 7/16 FLAT WASHERS

6 – 7/16 LOCK WASHERS

PROCEDURE:

1 – REMOVE CONTENT’S FROM BOX AND CHECK FOR DAMAGE. VERIFY ALL PARTS ARE

PRESENT. READ INSTRUCTIONS CAREFULLY.

2 – REMOVE LOWER URETHANE VALANCE LOCATED UNDERNEATH FRONT BUMPER

TEMPORARILY AND SET ASIDE

3 – UNBOLT (2) EXISTING NUTS LOCATED ON OUTER SIDE OF FRAME RAIL (PASSENGER SIDE

SHOWN) INSTALL LOWER BRACKET ONTO FRAME RAIL BOLTS *LEAVE LOOSE* (SEE FIG # 1)

4 – REPEAT PROCEDURE #3 ON OPPOSITE SIDE

5- INSTALL BULL BAR USING 6 – 7/16 X 1 1/4 HEX HEAD BOLTS, 6 – 7/16 HEX HEAD NUTS,

12 – 7/16 FLAT WASHERS *LEAVE LOOSE* (SEE FIG # 1)

6 – LEVEL AND ADJUST BULL BAR AS DESIRED. TIGHTEN & TORQUE BOLTS

7 – MEASURE AND TRIM LOWER URETHANE VALANCE AS DESIRED AND REINSTALL

VALANCE & FRONT BUMPER (Re-install *optional*)

1 2 3

For Technical Support/Warranty Information pl

Page 2

For Technical Support/Warranty Information pl

Page 3

For Technical Support/Warranty Information pl

Modèles reliés 53035 Bull Bar

Pas de commentaire