Smittybilt DN250-S4 Sure Steps Manuel d'utilisateur télécharger pdf

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220

Installation Instructions

Sure-Step (Part # DN250-S4)

06 Dodge Ram Mega Cab

PARTS LIST

(2) SIDE TUBES WITH STEPS (16) M12 FLAT WASHER

(2) FRONT MOUNT BRACKETS (16) M12 LOCK WASHER

(2) REAR MOUNT BRACKETS (16) M10 FLAT WASHERS

(2) FRONT BRACE BRACKETS (16) M10 LOCK WASHERS

(2) CENTER BRACE BRACKETS (12) M10 HEX NUTS

(4) M12 – 1.75 x 120mm HEX HEAD BOLT (2) M12 FLAT WASHERS (50mm O.D.)

(4) M12X60mm HEX HEAD BOLT

(2) M10X40mm HEX HEAD BOLT

(2) M10x35mm HEX HEAD BOLT WITH METAL STRAP

(2) M10X25mm HEX BOLTS

(2) M10 BOLT PLATES

PROCEDURE

1. Begin installation by working on driver side of the vehicle (refer to Figures 1. 1- 1.5)

2. From underneath truck, loosen and remove body mount bolts that run upward through mounts into floorboard.

Attach and secure Front Mount Bracket to underside of vehicles front body mount (see Figure 1.3), re-using

isolator, but replacing factory bolt with (1) M12 – 1.75 x 120mm bolt, (1) 1/2” LOCK WASHER, and (1) M12

FLAT WASHER. Also,

3. Attach and secure Rear Mount Bracket to underside of vehicles rear body mount in same manner as the front.

4. Attach and secure Center Brace brackets. See

Figure 1.3 to know where to install the Center Brace

Brackets.

5. Attach Front Brace Bracket to side of Front Mount Bracket using (1) M10X40mm bolt, (2) M10 flat washers, and

(1) M10 hex nut ,(1) lock washer (see Figure 1.5). Place (1) 3/8” x 1 ½” bolt with welded strap and (1) M12 flat

washer through cut out in frame rail. Line up slot on the long arm of the Brace Bracket with this bolt and secure

using (1) M10 flat washer and (1) M10 lock nut,(1) lock washer. Hand tighten.

6. Attach Side Tube to Front and Rear Brackets using (1) M12 – 1.75 x 60mm HEX HEAD BOLT , (1) M12 split lock

washer and (1) M12 flat washer for each bracket, and hand tighten. Torque M12 bolts first to 65 ft-lbs and then

tighten all remaining fasteners to complete the driver-side assembly.

7. Repeat process for passenger side of vehicle to complete installation.

1 2 3 4

Brackets 1
LIMITED WARRANTY 4

Résumé du contenu

Page 1 - Brackets

For Technical Support/Warranty Information pl

Page 2

For Technical Support/Warranty Information pl

Page 3

For Technical Support/Warranty Information pl

Page 4 - LIMITED WARRANTY

For Technical Support/Warranty Information pl

Commentaires sur ces manuels

Pas de commentaire

Smittybilt DN250-S4 Sure Steps Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Smittybilt DN250-S4 Sure Steps. Smittybilt DN250-S4 Sure Steps User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Smittybilt DN250-S4 Sure Steps